Counter-top Service Column
Media-cell Type Service Columns are column type with a size of 300 x 150 and various heights, produced entirely from Galvanized sheet metal and baked at 200 degrees after being painted with an anti-acid epoxy paint. It provides safe and systematic access to the service lines from the ceiling to the counters, as well as providing the services to be used locally without even a counter in some cases, also regionally.
Media-cell Type Service columns are used together with Media-cell Type Service units, which also have physical properties. As there are floor-mounted and countertop-mounted types, their heights also vary according to the height of the counters and the ceiling to which they are attached.
Media-cell Type Service Columns consist of body block and movable front panels. Body block, Gas, Water, Electricity etc. that will come down from the Ceiling. It is designed in such a way that the service lines will be installed in a systematic way.
The front panels, on the other hand, are designed to move up / down independently of the body block, again with a slide on the front of the body block. Main cut-off valves, electrical fuse boxes, switch gears, gas regulators and similar breakers are mounted on these panels.
Floor Mounted Service Column
Necessary Low Pressure Regulators can be safely mounted on the Service Columns so that the Technical Gases that are likely to be used in the benches can be supplied to the devices at the most appropriate pressure.
Except for safely and systematically lowering the gas lines from the ceiling to the counters, Main shut-off valves can be mounted on the Service columns to curb the gases in case of emergency.
Service Columns Technical Specifications
Counter Top Service Unit
Media-cell Type Service Units It is a type of Service Unit of 150 x 150 (triangle) size and various heights, produced entirely from Galvanized sheet metal and baked at 200 degrees after being painted with anti-acid epoxy paint. In general, Media-cell Type Service units;
• Bench Top Mounted
• Floor Mounted
It is designed in two types. The most suitable model can be selected according to the characteristics of the main infrastructure installations in the laboratories. Both Bench-top and Floor-mounted systems are also within themselves;
• Service Blocks
• Back panels
• Shelves
consists of three parts. Service Blocks, Gas, Water, Electricity, etc. that will descend from the Ceiling through the service columns. They are designed to distribute the service lines to the benches in a systematic and safe manner.
Service blocks also consist of two parts, Body and Front panels. Body block Front panels, which are designed to move up / down independently from the body block, again with a slide on the front face of the body block, are the sections where Gas, Water, Electric armatures will be mounted. The Back Panels are generally used on the upper wall of the counters on the wall, and the Shelves are optionally used in all models.
Servis Üniteleri Teknik Özellikleri
English 
Turkish